Do You Need a Lift at All? Avoiding Manual Handling Under Irish Law

•1,103 words•6 min read

You run the stores in a small Galway engineering firm, and every Monday morning two lads carry forty bags of cement from the delivery lorry to the back of the yard. One of them has started complaining about his lower back. Your first thought is to send them both on a refresher course. A better first question is simpler: do you need a lift at all? Under Irish law, avoiding the lift comes before training people to do it better.

The short answer is that an employer in Ireland must first try to avoid the need for manual handling altogether, using organisational measures or mechanical equipment. Only where a lift genuinely cannot be avoided does the duty move on to reducing the risk, assessing the task against the Schedule 3 risk factors and training the people who do it. That order comes from Regulation 68 of the Safety, Health and Welfare at Work (General Application) Regulations 2007, and the Health and Safety Authority (HSA) expects to see it followed.

What Does Irish Law Say About Avoiding Manual Handling?

Regulation 68 of the 2007 General Application Regulations sets out the employer's manual handling duties in a fixed sequence. The first duty is to take appropriate organisational measures, or use appropriate means, in particular mechanical equipment, to avoid the need for employees to manually handle loads. Only where that is not possible does the second duty apply: reduce the risk of the handling that remains, having regard to the risk factors listed in Schedule 3.

This mirrors the general principles of prevention in Schedule 3 of the Safety, Health and Welfare at Work Act 2005, which start with the avoidance of risks. An HSA inspector investigating a back injury will want to know whether anyone considered eliminating the lift before relying on technique.

Do You Need a Lift at All, or Can the Task Be Redesigned?

Most avoidable lifts survive because nobody has questioned them. A few honest questions usually reveal them:

Can the load arrive where it is needed? Ask the supplier to deliver on a pallet and drop it at the point of use with a tail lift, rather than unloading by hand at the gate. In the cement example, a pallet truck and a delivery to the back of the yard removes forty carries every week.

Can the load be moved without lifting? Sack trucks, pallet trucks, trolleys, roller conveyors and vacuum lifters let a person move a load without taking its weight through their spine. Our guide to lifting aids in the workplace covers the common options and when each one fits.

Can the layout change? Storing heavy stock between knee and shoulder height, moving a workstation closer to the goods-in area, or raising a work surface can remove lifting from floor level altogether.

Can the load itself change? Smaller pack sizes, split bags or bulk delivery into a hopper turn one high-risk lift into several low-risk ones, or into none.

When Is a Lift Considered Unavoidable?

The legal test is what is reasonably practicable. An employer is not expected to buy a forklift to move a single box of printer paper, but cost alone does not justify a high-risk lift that a cheap trolley would remove. The more serious the risk, the more effort and expense the employer is expected to accept to avoid it.

Some handling genuinely cannot be engineered out. Care workers repositioning a person in bed, plumbers carrying fittings up a ladder in a domestic house, or retail staff stocking low shelves all involve handling that can be reduced but rarely eliminated. In those cases the employer moves to the next stage: a manual handling risk assessment that looks at the load, the effort required, the working environment and the demands of the activity, as Schedule 3 sets out.

Regulation 69 adds a further layer. It requires employers to consider individual risk factors, such as whether a worker is physically suited to the task, is wearing suitable clothing and footwear, and has adequate knowledge and training. That is where manual handling training earns its place.

Where Does Manual Handling Training Fit In?

Training is the control for the handling that remains after avoidance and redesign. It teaches workers to assess a load before touching it, to use the equipment provided, to recognise when a task should be refused or shared, and to apply safe technique when they do lift. Good courses spend as much time on "should I lift this at all?" as on how to bend the knees.

The HSA recommends that training be delivered by an instructor holding a QQI Level 6 manual handling instructor qualification, and that it be refreshed at regular intervals, typically every three years. Task-specific instruction from the employer adds real value alongside a general course.

Who Needs to Think About This?

Every employer whose staff handle loads has this duty, but it bites hardest in a few places: warehouses and distribution centres, construction sites, retail stockrooms, hospitality cellars and kitchens, healthcare and residential care, and small trades where one person often loads and unloads a van alone.

Workers have a role too. Under section 13 of the 2005 Act, employees must use the equipment and systems of work provided and report defects or hazards. If a pallet truck is broken and everyone has reverted to carrying, that is something to report rather than work around.

Frequently Asked Questions

Is an employer legally required to avoid manual handling in Ireland?

Yes. Regulation 68 of the Safety, Health and Welfare at Work (General Application) Regulations 2007 requires employers to first avoid the need for manual handling where possible, using organisational measures or mechanical equipment, before reducing the risk of any handling that cannot be avoided.

Does manual handling training replace the need to avoid lifting?

No. Training is a control for handling that cannot reasonably be avoided. An employer who trains staff but leaves an easily avoidable high-risk lift in place has not met the full duty under the 2007 Regulations.

What is the hierarchy for controlling manual handling risk?

Avoid the manual handling first, then assess any handling that remains against the Schedule 3 risk factors, reduce the risk through equipment, layout and task changes, and finally provide information and training for the people carrying out the task.

Is there a maximum weight a person can lift at work in Ireland?

No. Irish law does not set a legal maximum weight. The HSA expects each task to be judged on its risk factors, including the load, posture, frequency, distance and environment, rather than on a single weight limit.

Related Articles

Get Certified Today

Get your QQI-certified manual handling course online. Complete in under 1 hour with instant certification from €30.

Start Your Manual Handling Course